Protruar 1.0 PRO
The first Haswing in the new PRO line — a magnetic safety kill switch and a redesigned, quieter drivetrain.
- Thrust
- 65lbs
- Voltage
- 12V
- Power
- 600W
Suggested retail price
1,790 PLN
01 / Overview
The Protruar 1.0 PRO opens a new PRO line at Haswing — the same power class as the 1.0 LED (65 lbs, 600 W, 12 V), rebuilt with new components: a quieter drivetrain, upgraded electronics and a magnetic safety kill switch that cuts the motor the instant the lanyard is pulled. That matters if the driver goes overboard — the motor won’t keep running unmanned.
The digital maximizer delivers smooth, stepless speed control and extends battery runtime up to five times versus a classic gear switch — essential for trolling.
A digital display shows real-time battery voltage, and the 3-blade Ø 23.6 cm prop has an extra guard collar on the inner side to stop line or braid wrapping around the rotor.
The telescopic tiller adjusts over 35 cm and 180° of tilt, and folds down flat for transport. The universal transom bracket (heat-resistant material) offers 10 mounting positions and adjustment along the full column length — for transom boards up to 68 mm thick. The anodised aluminium column runs corrosion-free in fresh and salt water.
02 / In the box & options
- ▸Magnetic safety kill switch (24000392-S)
- ▸Real-time digital voltage display
- ▸3-blade Ø 23.6 cm prop with rotor guard collar
- ▸Telescopic tiller 35 cm / 180°
- ▸Option: motor carry bag (HW-B90)
04 / Motor construction
- 01
Voltage display
A digital display shows real-time battery voltage — full visibility of the charge level.
- 02
Telescopic tiller
Extends 35 cm, tilts through 180°, folds down flat for transport.
- 03
Tiller lock
Holds the tiller at working angle and folds it for transport.
- 04
Safety kill switch
The magnetic lanyard cuts the motor the instant it's pulled — critical if the driver goes overboard.
- 05
Aluminium shaft
Anodised aluminium — fresh and salt water ready.
90 cm (aluminiowa)
- 06
Transom bracket
10 working positions, fits transoms 26–68 mm thick.
- 07
Motor depth adjustment
Depth collar — stepless adjustment along the full shaft length.
- 08
Propeller
Blade profile matched to the thrust of the model.
3-blade Ø 23.6 cm
- 09
Fin
Shields the propeller from bottom contact and weeds.
- 10
Brushless motor
Higher efficiency and quieter operation than brushed designs — no brushes to wear out.
~50 dB
05 / Pairs well with
Haswing motor carry bag
Code: HW-B90
View accessory →
80A power switch
Code: 59928
View accessory →
Fuse holder
Code: 10AGU108
View accessory →
3-blade propeller (Protruar 1.0 / 2.0R)
Code: 24001309
View accessory →
Transom bracket
Code: 24000238
View accessory →
Shaft depth lock (Osapian)
Code: 24000235
View accessory →06 / Gallery
07 / FAQ
Which battery fits the Protruar 1.0 PRO?+
The recommended battery is min. 100 Ah Gel / Li-ion 3S / LiFePO4 4S. For a precise runtime estimate at a given capacity, use the battery calculator.
Which fuse should I use?+
This motor draws up to ~50 A at full throttle, so the recommended fuse rating is 60 A (AGU-type or resettable) — in practice, round up to the nearest size available.
How do I choose the right shaft length for my boat?+
This model ships with a 90 cm (aluminiowa) shaft. For the general sizing rule (transom or gunwale height → shaft length) see the sizing table on this page — Haswing motors also offer depth adjustment along the full shaft length, so a small mismatch is rarely a dealbreaker.
Does the motor run in salt water?+
Yes — the entire Haswing range runs in both fresh and salt water. After a season in salt water, rinse the shaft and prop with fresh water.
Protruar 1.0 PRO
1,790 PLN